lemon-mirror:
Home >> Subaru >> 2021 >> Outback Base >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Airbag System >> Impact Sensor >> Installation >> Front Impact Sensor

Front Impact Sensor

CAUTION: Refer to "CAUTION" of "General Description" before handling the airbag system components. Ref. to AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION .
  1. Before installation, inspect the following items and replace any faulty part with a new part.
    • Front impact sensor is free from damage.
    • Connector is free from damage.
  2. Using new bolts and nuts, install Front impact sensor.
    CAUTION: When installing the sensor, insert the set pin on the backside of the sensor into the hole on the body side securely.

    Tightening torque: 

    13 N.m (1.3 kgf-m, 9.6 ft-lb)

  3. Install the air intake duct (rear). (When removing the sensor RH)
  4. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
· About lemon-mirror