lemon-mirror:
Home >> Subaru >> 2021 >> Outback Base >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension System And Wheel Alignment >> Crossmember Support >> Installation

Crossmember Support: Installation

  1. Install the crossmember support front and the crossmember support rear.

    Tightening torque: 

    Crossmember support front: 60 N.m (6.1 kgf-m, 44.3 ft-lb)

    Crossmember support rear: 70 N.m (7.1 kgf-m, 51.6 ft-lb)

  2. Install the under guard front.(H4DOTC model)

    Tightening torque: 

    32 N.m (3.3 kgf-m, 23.6 ft-lb)

  3. Install the under cover front. Ref. to EXTERIOR/INTERIOR TRIM>FRONT UNDER COVER>INSTALLATION .
· About lemon-mirror