Front Fog Light Assembly: Installation
WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.
- Install the fog light assembly front.
Tightening torque:
2 N.m (0.2 kgf-m, 1.5 ft-lb)
- Lower the vehicle.
- Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY
- Adjust the fog light beam. Ref. to LIGHTING SYSTEM>FRONT FOG LIGHT ASSEMBLY>ADJUSTMENT>FOG LIGHT AIMING
- Install the mud guard front. Ref. to EXTERIOR/INTERIOR TRIM>MUD GUARD>INSTALLATION