Room Light: Inspection

WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.

Measure the resistance between connector terminals.

Courtesy of SUBARU OF AMERICA, INC.

Terminal No.	Inspection conditions	Standard
1 - 3	Switch OFF	1 MΩ or more
1 - 3	Switch ON	Less than 1 Ω
2 - 3	Switch door	Less than 1 Ω

Apply battery voltage between the connector terminals to check the lighting condition of the light.

Terminal No.	Inspection conditions	Specification
3 (+) - 1 (-) 3 (+) - 2 (-)	Switch OFF	Light OFF
	Switch ON	Light ON
	Switch door	Light ON

Replace the light assembly roof if faulty is found in the inspection.