lemon-mirror:
Home >> Subaru >> 2022 >> Ascent Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Fuel Injection System) >> Engine Control Module (ECM) >> Removal

Engine Control Module (ECM): Removal

WARNING: This page is about a different car, the 2021 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Disconnect the connector in numerical order as shown in the figure.
    G13198164Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the ECM from vehicle.
    G13198325Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the ECM bracket.
    G13198326Courtesy of SUBARU OF AMERICA, INC.
· About lemon-mirror