RH Side
WARNING: This page is about a different car, the 2021 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
- Install the spark plug.NOTE: Magnet type PLUG WRENCH is recommended.
Tightening torque:
18 N.m (1.8 kgf-m, 13.3 ft-lb)
- Install the ignition coil (RH side). Ref. to IGNITION (H4DOTC)>Ignition Coil>INSTALLATION>RH SIDE .
- Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .