Output Speed Sensor: Installation

CAUTION: If water or oil contacts the connector terminal of the output revolution sensor, replace it with a new part.

Install the output revolution sensor using a new O-ring, and connect the connector.
CAUTION: Check the installation condition of the output revolution sensor.

Courtesy of SUBARU OF AMERICA, INC.

(A) Clearance

NOTE: Apply ATF to the O-ring.

Tightening torque:

5.4 N.m (0.6 kgf-m, 4.0 ft-lb)
Install the transmission body. Ref. to AUTOMATIC TRANSMISSION>TRANSMISSION ASSEMBLY>INSTALLATION .