Stabilizer Link

CAUTION:

For parts which are not reusable, always use new parts.
Always tighten the stabilizer bushing in the state where the vehicle is at curb weight and the wheels are in full contact with the ground.
Be careful not to damage the boot of the ball joint.

Before installation, inspect the following items and replace any faulty part with a new one.
Check the stabilizer link rear for damage.
Install the stabilizer link rear.
Tightening torque:

Refer to "COMPONENT" of "General Description" for the tightening torque. Ref. to REAR SUSPENSION>GENERAL DESCRIPTION>COMPONENT .