lemon-mirror:
Home >> Subaru >> 2022 >> Outback Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> CVT Transaxle System (Tr580) >> Torque Converter >> Installation

Torque Converter: Installation

  1. Install a new O-ring.
    NOTE:

    Apply CVTF to the O-rings. 

  2. Install the torque converter.
    CAUTION:
    • Do not damage the oil seal and O-ring. 
    • Be careful not to scratch the inside of engaging parts. 
    NOTE:
    • Apply CVTF to the oil seal lip. 
    • Engage the splines while gently rotating the torque converter by hand. 
  3. Measure the dimension "A" from converter case end surface to drive plate mounting surface.

    Specification: 

    6.8 mm (0.27 in) or less

    G13950542Courtesy of SUBARU OF AMERICA, INC.
  4. Attach the ST to converter case.

    Preparation tool: 

    ST: STOPPER SET (498277200)

    G13950543Courtesy of SUBARU OF AMERICA, INC.
  5. Install the transmission body. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR580)>TRANSMISSION ASSEMBLY>INSTALLATION .
· About lemon-mirror