lemon-mirror:
Home >> Subaru >> 2022 >> WRX Base, Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Intake System (Induction) >> Intercooler >> Assembly

Engine Intake System (Induction): Intercooler: Assembly

  1. Temporarily install the intake duct No. 3 using a new gasket.
  2. Tighten the bolts in the numerical order as shown in the figure.

    Tightening torque: 

    16 N.m (1.6 kgf-m, 11.8 ft-lb)

    Fig 1: Intake Duct No. 3 Bolts Tightening Sequence
    G13198601Courtesy of SUBARU OF AMERICA, INC.
· About lemon-mirror