lemon-mirror:
Home >> Subaru >> 2023 >> Ascent Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> CVT Transaxle System >> Inhibitor Switch >> Removal

Inhibitor Switch: Removal

  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Release the shift lock and shift the select lever to the "N range". Ref. to CONTROL SYSTEMS>SELECT LEVER>REMOVAL .
  3. Disconnect the select cable from the transmission main body.
    CAUTION: Do not apply excessive load while holding the part (a).
    G14602401Courtesy of SUBARU OF AMERICA, INC.
    G14602402Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the spring pin (A) and remove the shifter arm (B).
    G13621942Courtesy of SUBARU OF AMERICA, INC.
  5. Disconnect the connector and remove the inhibitor switch.
    G13225675Courtesy of SUBARU OF AMERICA, INC.
· About lemon-mirror