Select Mode Switch: Inspection

Check the resistance between SPORT MODE switch terminals.

Courtesy of SUBARU OF AMERICA, INC.

Terminal No.	Inspection conditions	Standard
4 - 8	Switch OFF	1 MΩ or more
4 - 8	Switch ON	Less than 1 Ω

Check the resistance between SNOW MODE switch terminals.

Courtesy of SUBARU OF AMERICA, INC.

Terminal No.	Inspection conditions	Standard
6 - 8	Switch OFF	1 MΩ or more
6 - 8	Switch ON	Less than 1 Ω

Check the illumination condition by applying the battery voltage between the illumination terminals.
CAUTION: When applying battery voltage, do not mix up the positive (+) side and the negative (-) side.
Incorrect polarity connection may cause LED damage inside the switch.

Courtesy of SUBARU OF AMERICA, INC.

Terminal No.	Inspection conditions	Judgment standards
2 (+) - 3 (-)	Apply battery voltage.	Light ON