Camera Control Module
- Install the camera control assembly.
- Install the under cover assembly driver. Ref. to EXTERIOR/INTERIOR TRIM>INSTRUMENT PANEL LOWER COVER>INSTALLATION .
- Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
- When the camera control assembly has been replaced, read the [Front & side Camera/Multi View Monitor] customizing information. Ref. to COMMON (DIAGNOSTICS)>CUSTOMIZE>OPERATION > SAVE SETTINGS / READ SETTINGS .
Tightening torque:
7.5 N.m (0.8 kgf-m, 5.5 ft-lb)