Starter Specifications
STARTER SPECIFICATIONS (A/T)
| Application | Specification | |
|---|---|---|
| Brush Length | ||
| Standard | .69 (17.5) | |
| Wear Limit | .47 (12.0) | |
| Commutator Outside Diameter | ||
| Standard | 1.16" (29.4 mm) | |
| Wear Limit | 1.13" (28.8 mm) | |
| Armature Maximum Runout | .015" (.40 mm) | |
| Insulator Depth | ||
| Standard Depth | .015-.023" (.40-.60 mm) | |
| Wear Limit | .008" (.20 mm) | |
| Cold Cranking Amperage & Voltage | 300 Amps @ 7.7 Volts | |
| No-Load Maximum Current Draw (At 11 Volts) | 50-75 Amps | |
STARTER SPECIFICATIONS (M/T)
| Application | Specification | |
|---|---|---|
| Brush Length | ||
| Standard | .67 (17.0) | |
| Wear Limit | .45 (11.5) | |
| Commutator Outside Diameter | ||
| Standard | 1.26" (32.0 mm) | |
| Wear Limit | 1.24" (31.4 mm) | |
| Armature Maximum Runout | .015" (.40 mm) | |
| Insulator Depth | ||
| Standard Depth | .015-.023" (.40-.60 mm) | |
| Wear Limit | .008" (.20 mm) | |
| Cold Cranking Amperage & Voltage | 150 Amps @ 9.0 Volts | |
| No-Load Maximum Current Draw (At 11 Volts) | 60 Amps | |