lemon-mirror:
Home >> Suzuki >> 2000 >> Swift GA, Automatic >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Panels >> Component Tests >> Warning Controller >> Swift

Warning Controller: Swift

  1. Disconnect warning controller connector. Connect ground to terminals No. 1 and 7 of warning controller. Connect positive battery voltage to terminals No. 4 and 5 of warning controller. See Fig 1 . If buzzer sounds for 4-8 seconds, go to next step. If buzzer does not sound for 4-8 seconds, replace warning controller.
  2. Connect positive battery voltage to terminal No. 4 of warning controller. Connect ground to terminals No. 6 and 7 of warning controller. If buzzer sound constantly, go to next step. If buzzer does not sound constantly, replace warning controller.
  3. Connect positive battery voltage to terminals No. 2 and 5 of warning controller. Connect ground to terminal No. 7 of warning controller, then remove connection from terminal No. 5. If buzzer sounds constantly, controller is operating properly at this time. If buzzer does not sound constantly, replace warning controller.
Fig 1: Testing Warning Controller (Swift)
G93H01989Courtesy of SUZUKI OF AMERICA CORP.
· About lemon-mirror