lemon-mirror:
Home >> Suzuki >> 2003 >> Aerio S, Automatic >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Specifications & Procedures >> Adjustments >> Toe-In Adjustment >> Front

Toe-In Adjustment: Front

  1. Measure toe-in with toe-in gauge and compare to WHEEL ALIGNMENT SPECIFICATIONS . See Fig 1. If toe-in is not within specification, go to next step.
  2. Loosen right and left tie rod end lock nuts. Rotate right and left tie rods by the same amount to align toe-in to specification. See Fig 2. In this adjustment, right and left tie rods should become equal in length.
    NOTE: Before rotating tie rods, apply grease between tie rods and rack boots so that boots won't be twisted.
  3. After adjustment, tighten lock nuts to specified torque. See TORQUE SPECIFICATIONS .
Fig 1: Measuring Toe-In
G00276148Courtesy of SUZUKI OF AMERICA CORP.
Fig 2: Adjusting Front Toe-In
G00276149Courtesy of SUZUKI OF AMERICA CORP.
· About lemon-mirror