Body & Frame: Glass/Windows/Mirrors: Specifications
RECOMMENDED MATERIALS FOR WATERLEAK REPAIRS
| Leak Areas | Repair Materials |
|---|---|
| Windshield, back window | Urethane adhesive, caulking kit, or the equivalent |
| Metal joints | Brushable seam sealer which can be painted |
| Ventilation ducts | 3Mnv Auto Bedding and Glazing Compound or the equivalent |
| Small cracks and pin holes | 3Mnv Drip-Check Sealer or the equivalent |
| Large holes | 3Mnv Automotive Joint and Seam Sealer |
| Weatherstrips | 3Mnv 08011 Weatherstrip Adhesive or the equivalent |
| Bolts, studs, and screws | Strip caulk |
WATERTEST STAND SPECIFICATIONS
| Application | Description |
|---|---|
| Nozzle Type | Full jet spray nozzle #1/2 GG-25 or equivalent with a 60° included angle |
| Nozzle Height | Approximately 1 600 mm (63.0 in.) from the floor |
| Volume of Flow | 14 L (3.7 gal) per minute |
| Pressure | 155 kPa (22.5 psi) measured at the nozzle |
| Windshield and A-Pillar Test Stand Position | Approximately 30° down, 45° toward the rear, and aimed at the corner of the windshield |
| B-Pillar Test Stand Position | Approximately 30° down, 45° toward the rear, and aimed at the center of the rear door |
| Back Window and Rear Deck Lid Test Stand Position | Approximately 30° down, 30° toward the front and aimed approximately 610 mm (24.0 in.) from the corner of the back window |
TIGHTENING TORQUE SPECIFICATIONS
| Application | N.m | Lb-Ft | Lb-In |
|---|---|---|---|
| Glass Screws | 7 | - | 62 |
| Guide Rail Bolts | 7 | - | 62 |
| Guide Rail Screw | 4 | - | 35 |
| Outside Rearview Mirror Assembly Bolts Screws | 4.5 | - | 40 |
| Rearview Mirror Mounting Bolt | 1.2 | - | 11 |