lemon-mirror:
Home >> Suzuki >> 2006 >> Verona Base >> Repair and Diagnosis >> Transmission >> Automatic Transmission >> Repair Instructions >> Shift Control Cable Removal

Shift Control Cable Removal

  1. Disconnect the negative battery cable.
  2. Remove the air filter housing assembly and bolts.
  3. Remove the clip from the selector lever connection on the transaxle case and disconnect the shift control cable from the selector lever connection.
  4. Remove the clip from the shift control cable at the transaxle mount connection.
    Fig 1: Identifying Shift Control Cable & Clip
    G04717246Courtesy of SUZUKI OF AMERICA CORP.
  5. Remove the floor console. Refer to FLOOR CONSOLE REMOVAL .
  6. Loosen the shift control cable adjuster pinch nut.
  7. Loosen the nut from the cable bracket.
  8. Remove the shift control cable from the shift control assembly.
    Fig 2: Identifying Shift Control Cable & Shift Control Assembly
    G04719701Courtesy of SUZUKI OF AMERICA CORP.
  9. Remove the shift control cable from the transaxle mount.
  10. Pull the shift control cable through the fire wall of the vehicle, bringing the rubber grommet with it.
Fig 3: Identifying Shift Control Cable & Transaxle Mount
G04719708Courtesy of SUZUKI OF AMERICA CORP.
· About lemon-mirror