lemon-mirror:
Home >> Suzuki >> 2007 >> XL7 Base, FWD >> Repair and Diagnosis >> Transmission >> Automatic Transmission >> Repair Instructions >> Input Speed Sensor Replacement >> Installation Procedure

Installation Procedure

Fig 1: Identifying Input Speed Sensor (2 Of 2)
G04845951Courtesy of SUZUKI OF AMERICA CORP.
  1. Apply GM T-IV automatic transaxle fluid GM P/N 88900925 to the new input speed sensor O-ring.
  2. Install the new input speed sensor O-ring onto the input speed sensor.
  3. Install the input speed sensor to the transaxle.
    CAUTION: Refer to FASTENER NOTICE .
  4. Install the input speed sensor bolt.

    Tightening torque 

    Tighten the bolt to 6 N.m (53 lb in)  .

    Fig 2: Identifying Input Speed Sensor & Electrical Connector
    G04845952Courtesy of SUZUKI OF AMERICA CORP.
  5. Connect the electrical connector (4) to the input speed sensor.
  6. Install the battery tray. Refer to BATTERY TRAY REPLACEMENT .
· About lemon-mirror