lemon-mirror:
Home >> Suzuki >> 2007 >> XL7 Base, FWD >> Repair and Diagnosis >> Transmission >> Automatic Transmission >> Repair Instructions >> Output Speed Sensor Replacement >> Installation Procedure

Installation Procedure

Fig 1: Identifying Output Speed Sensor
G04845955Courtesy of SUZUKI OF AMERICA CORP.
  1. Apply GM T-IV automatic transaxle fluid GM P/N 88900925 to the new output speed sensor O-ring.
  2. Install the new output speed sensor O-ring onto the output speed sensor (2).
  3. Install the output speed sensor into the transmission case assembly.
    CAUTION: Refer to FASTENER NOTICE .
  4. Install the output speed sensor bolt.

    Tightening torque 

    Tighten the bolt to 6 N.m (53 lb in)  .

    Fig 2: Identifying Output Speed Sensor & Electrical Connector
    G04845956Courtesy of SUZUKI OF AMERICA CORP.
  5. Connect the electrical connector (2) to the output shaft speed sensor.
  6. Install the battery tray. Refer to BATTERY TRAY REPLACEMENT .
· About lemon-mirror