lemon-mirror:
Home >> Suzuki >> 2007 >> XL7 Base, FWD >> Repair and Diagnosis >> Transmission >> Automatic Transmission >> Repair Instructions >> Transmission Control Module Replacement >> Removal Procedure

Removal Procedure

  1. Remove the battery tray. Refer to BATTERY TRAY REPLACEMENT .
    NOTE: The transaxle manual shaft must be in neutral (N) position prior to re-installing the transmission control module (TCM).
  2. Apply the parking brake and place control shift lever in neutral (N).
    Fig 1: Identifying Manual Shaft Detent Lever & TCM
    G04845924Courtesy of SUZUKI OF AMERICA CORP.
  3. Remove the manual shaft detent lever (2). Refer to REMOVAL PROCEDURE .
  4. Disconnect the electrical connectors from the TCM.
  5. Remove the TCM bolts (3).
  6. Remove the TCM (4) by sliding off of the manual shaft.
· About lemon-mirror