lemon-mirror:
Home >> Suzuki >> 2008 >> Reno Automatic >> Repair and Diagnosis >> General Information >> Reset Procedures >> BARTEC TPMS Reset Procedure >> BARTEC TPMS Reset Procedure

BARTEC TPMS Reset Procedure

  1. Inflate tires to correct pressure.
  2. Enter vehicle and close door.
  3. Apply parking brake (not always req'd).
  4. Turn ignition ON.
    NOTE: Door switch step (below) must be done within 15 seconds of turning the ignition on.
  5. Open door and exit vehicle leaving door open.
  6. Press hold drivers side door switch for 4 seconds.
  7. Release then press again for 4 seconds.
  8. Release switch, then press for 7 seconds.
  9. CLOSE DOOR.
  10. Place tool close to LF valve location.
  11. Activate sensor.
  12. Repeat on RF, RR, and LR.
NOTE: TIA troubleshooting tip: Vehicle gives no indication it has entered learn mode. Ref to SUZ-2 in TIA guide for more details.
· About lemon-mirror