lemon-mirror:
Home >> Suzuki >> 2008 >> XL7 Base, AWD >> Repair and Diagnosis >> Transmission >> Automatic Transmission >> Repair Instructions >> Input Speed Sensor Replacement >> Removal Procedure

Removal Procedure

  1. Remove the battery tray. refer to BATTERY TRAY REPLACEMENT .
    Fig 1: Identifying Electrical Connector
    G05469835Courtesy of SUZUKI OF AMERICA CORP.
  2. Disconnect the electrical connector (4) from the input speed sensor.
    Fig 2: Identifying Input Speed Sensor And Bolt
    G05469836Courtesy of SUZUKI OF AMERICA CORP.
  3. Remove the input speed sensor bolt.
  4. Remove the input speed sensor.
  5. Remove the input speed sensor O-ring. Discard the O-ring.
· About lemon-mirror