lemon-mirror:
Home >> Tesla >> 2021 >> Model Y Performance >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Suspension -- Model Y >> Adjustment >> Four Wheel Alignment Check And Adjust >> Complete The Alignment

Complete The Alignment

  1. Print the vehicle summary and verify that the alignment parameters are within specifications. See WHEEL ALIGNMENT .
    NOTE: Repeat the adjustment for any parameter that is not within specification.
  2. Install the mid aero shield panel. See PANEL - AERO SHIELD - MID (REMOVE AND REPLACE) .
  3. Lower the alignment rack to a working height and lock.
  4. Remove the alignment heads from the wheels.
  5. Remove the brake pedal depressor.
  6. Install the alignment slip/turn plate pins.
  7. Lower the alignment rack to the ground.
  8. Unlatch the driver's door, shift into Park, and remove the steering wheel bubble level.
  9. Unbuckle the seat belts and remove the ballast bags from the vehicle.
  10. Remove the seat covers from the seats.
  11. Enable Service Mode through the touchscreen. See ENABLE SERVICE MODE VIA VEHICLE TOUCHSCREEN
  12. Unlock the vehicle gateway for diagnostic communication.See GATEWAY (UNLOCK)
  13. On the vehicle touchscreen, touch Service Mode  (spanner icon).
  14. Touch Chassis  (damper icon) and then touch Alignment & Tires  .
  15. Touch Clear Offset  , and then touch Run  .
  16. Touch Controls  (vehicle icon), Service Mode  and then touch Exit Service Mode  .
  17. Remove the wheel chocks.
  18. Install the cowl screen panel, if removed. See PANEL - COWL SCREEN - REMOVE AND REPLACE
  19. Remove the vehicle from the alignment rack.
  20. Perform a test drive and verify vehicle operation.
· About lemon-mirror