lemon-mirror:
Home >> Toyota >> 1985 >> Tercel DX, 4D Hatchback, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Deceleration Fuel Cut System >> System Testing >> Deceleration Fuel Cut System >> Land Cruiser

Land Cruiser

  1. Connect tachometer to engine. Start engine and check that engine idles properly. Pinch off hose to vacuum switch.
  2. Gradually increase engine speed to 2000 RPM (2300 RPM for Corolla). Engine should misfire slightly between 1800-3000 RPM as engine speed is raised.
    NOTE: Perform this procedure quickly to avoid overheating and damage to converter.
  3. Release hose and raise engine speed, checking to see that engine runs smoothly. Unplug wiring connector to solenoid valve. Engine should now idle rough. If engine responds as indicated, system is operating normally. Stop engine, and reconnect wiring.
· About lemon-mirror