lemon-mirror:
Home >> Toyota >> 1993 >> Camry SE, Automatic >> Repair and Diagnosis >> Engine Performance >> Sensor Range Charts >> Engine Controls - Sensor Operating Range Charts >> Introduction >> Throttle Position Sensor

Throttle Position Sensor

NOTE: For terminal identification and testing procedures, see I - SYS/COMP TESTS article in the ENGINE PERFORMANCE section.
CAMRY TPS RESISTANCE SPECIFICATIONS

Application Type Clearance In. (mm) Terminals Tested Ohmmeter Reading
2.2L (1) 0 (0) VTA & E2 200-5700
" .020 (.51) IDL & E2 2300 Or Less
" .028 (.71) IDL & E2 No Continuity
" Fully Open VTA & E2 2000-10,200
" " VC & E2 2500-5900
3.0L (1) 0 (0) VTA & E2 280-6400
" .014 (.36) IDL & E2 500 Or Less
" .028 (.71) IDL & E2 No Continuity
" Fully Open VTA & E2 2000-11,600
" " VC & E2 2700-7700
(1) Apply vacuum to throttle opener before checking TPS.
CELICA TPS RESISTANCE SPECIFICATIONS

Application Type Clearance In. (mm) Terminals Tested Ohmmeter Reading
1.6L 4A-FE .024 (.61) IDL & E2 Continuity
" " PSW-E2 No Continuity
" .031 (.79) IDL-E2 No Continuity
" " PSW-E2 No Continuity
" Fully Open IDL-E2 No Continuity
" " PSW-E2 Continuity
2.0L Turbo (1) 0 (0) VTA & E2 470-6100
" .020 (.51) IDL & E2 2300 Or Less
" .028 (.71) IDL & E2 No Continuity
" Fully Open VTA & E2 3100-12,100
" " VC & E2 3900-9000
2.2L 5S-FE (1) 0 (0) VTA & E2 200-5700
" .020 (.51) IDL & E2 2300 Or Less
" .028 (.71) IDL & E2 No Continuity
" Fully Open VTA & E2 2000-10,200
" " VC & E2 2500-5900
(1) Apply vacuum to throttle opener before checking TPS.
COROLLA TPS RESISTANCE SPECIFICATIONS

Application Type Clearance In. (mm) Terminals Tested Ohmmeter Reading
1.6L & 1.8L (1) 0 (0) VTA & E2 200-6000
" .016 (.41) IDL & E2 2300 Or Less
" .035 (.89) IDL & E2 No Continuity
" Fully Open VTA & E2 3300-10,000
" " VC & E2 4000-8500
(1) On California models, apply vacuum to throttle opener before checking TPS.
LAND CRUISER TPS RESISTANCE SPECIFICATIONS

Application Type Clearance In. (mm) Terminals Tested Ohmmeter Reading
4.5L (1) 0 (0) VTA & E2 200-5700
" .020 (.51) IDL & E2 2300 Or Less
" .030 (.76) IDL & E2 No Continuity
" Fully Open VTA & E2 2000-10,200
" " VC & E2 2500-5900
(1) Apply vacuum to throttle opener before checking TPS.
MR2 TPS RESISTANCE SPECIFICATIONS

Application Type Clearance In. (mm) Terminals Tested Ohmmeter Reading
Turbo & Non-Turbo (1) 0 (0) VTA & E2 200-5700
" .020 (.51) IDL & E2 2300 Or Less
" .028 (.71) IDL & E2 No Continuity
" Fully Open VTA & E2 2000-10,200
" " VC & E2 2500-5900
(1) Apply vacuum to throttle opener before checking TPS.
PASEO TPS RESISTANCE SPECIFICATIONS

Application Type Clearance In. (mm) Terminals Tested Ohmmeter Reading
1.5L (1) 0 (0) VTA & E2 200-5700
" .020 (.51) IDL & E2 2300 Or Less
" .028 (.71) IDL & E2 No Continuity
" Fully Open VTA & E2 2000-10,200
" " VC & E2 2500-5900
(1) On A/T and California models, apply vacuum to throttle opener before checking TPS.
PICKUP & 4RUNNER TPS RESISTANCE SPECIFICATIONS

Application Type Clearance In. (mm) Terminals Tested Ohmmeter Reading
2.4L 0 (0) VTA & E2 470-6100
" .022 (.56) IDL & E2 2300 Or Less
" .034 (.86) IDL & E2 No Continuity
" Fully Open VTA & E2 3100-12,100
" " VCC & E2 3900-9000
3.0L (1) 0 (0) VTA & E2 470-6100
" .020 (.51) IDL & E2 2300 Or Less
" .031 (.79) IDL & E2 No Continuity
" Fully Open VTA & E2 3100-12,100
" " VC & E2 3900-9000
(1) Apply vacuum to throttle opener before checking TPS.
PREVIA TPS RESISTANCE SPECIFICATIONS

Application Type Clearance In. (mm) Terminals Tested Ohmmeter Reading
2.4L 0 (0) VTA & E2 300-6300
" .024 (.61) IDL & E2 2300 Or Less
" .041 (1.04) IDL & E2 No Continuity
" Fully Open VTA & E2 3500-10,300
" " VC & E2 4250-8250
SUPRA TPS RESISTANCE SPECIFICATIONS

Application Type Clearance In. (mm) Terminals Tested Ohmmeter Reading
Non-Turbo (1) 0 (0) VTA & E2 340-16300
" .016 (.41) IDL & E2 500 Or Less
" .024 (.61) IDL & E2 No Continuity
" Fully Open VTA & E2 2400-11,200
" " VC & E2 3100-7200
Turbo (1)(2) 0 (0) VTA & E2 340-6300
" .021 (.53) IDL & E2 500 Or Less
" .028 (.71) IDL & E2 No Continuity
" Fully Open VTA & E2 2400-11,200
" " VC & E2 3100-7200
(1) Apply vacuum to throttle opener before checking TPS.
(2) This is the main throttle position sensor. A sub-throttle position sensor is also used. See SUB-THROTTLE POSITION SENSOR .
TERCEL TPS RESISTANCE SPECIFICATIONS

Application Type Clearance In. (mm) Terminals Tested Ohmmeter Reading
1.5L (1) 0 (0) VTA & E2 200-800
" .020 (.51) IDL & E2 2300 Or Less
" .028 (.71) IDL & E2 No Continuity
" Fully Open VTA & E2 3300-10,000
" " VC & E2 3000-7000
(1) On California models, apply vacuum to throttle opener before checking TPS.
T100 TPS RESISTANCE SPECIFICATIONS

Application Type Clearance In. (mm) Terminals Tested Ohmmeter Reading
3.0L 0 (0) VTA & E2 470-6100
" .020 (.51) IDL & E2 2300 Or Less
" .031 (.79) IDL & E2 No Continuity
" Fully Open VTA & E2 3100-12,100
" " VC & E2 3900-9000
· About lemon-mirror