Circuit Opening Relay

Ensure ignition is off. Remove circuit opening relay. See CIRCUIT OPENING RELAY LOCATION table. Using ohmmeter, check continuity between specified terminals. See Fig 1-26.
Check circuit opening relay operation by applying battery voltage and ground and checking continuity between specified terminals. See Fig 1-26. Replace circuit opening relay if defective.

NOTE: Circuit opening relay may also be identified using appropriate illustration in THEORY/OPERATION article or wire color. See appropriate wiring diagram in WIRING DIAGRAMS article.

CIRCUIT OPENING RELAY LOCATION

Application	Location
Camry	Center Relay Located Behind Glove Box

Fig 1: Testing Circuit Opening Relay - Checking Continuity (2.2L)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 2: Testing Circuit Opening Relay - Checking Operation (2.2L)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 3: Testing Circuit Opening Relay - Checking Continuity (3.0L)

Fig 4: Testing Circuit Opening Relay - Checking Operation (3.0L)