lemon-mirror:
Home >> Toyota >> 1994 >> Previa DX, RWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Relays >> Circuit Opening Relay

Circuit Opening Relay

  1. Ensure ignition is off. Remove circuit opening relay. See CIRCUIT OPENING RELAY LOCATION  table. Using ohmmeter, check continuity between specified terminals. See Fig 1-24.
  2. Check circuit opening relay operation by applying battery voltage and ground and checking continuity between specified terminals. See Fig 1-24. Replace circuit opening relay if defective.
NOTE: Circuit opening relay may also be identified using appropriate illustration in THEORY/OPERATION article or wire color. See appropriate wiring diagram in WIRING DIAGRAMS article.
CIRCUIT OPENING RELAY LOCATION

Application Location
Previa In Fuse/Relay Box, Located Below Top Center Area Of Instrument Panel
Fig 1: Testing Circuit Opening Relay (Step 1, Continuity)
G92G27413Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Fig 2: Testing Circuit Opening Relay (Step 2)
G92H27414Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Fig 3: Testing Circuit Opening Relay (Step 3, Operation)
G92I27415Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
· About lemon-mirror