lemon-mirror:
Home >> Toyota >> 1995 >> Supra 2JZ-GE, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Testing >> Ignition Checks (DISTRIBUTORLESS Ignition System) >> Crankshaft Position Sensor >> Turbo

Crankshaft Position Sensor: Turbo

  1. Remove air tube for charge air cooler, located near front of crankshaft, to access electrical connector for crankshaft position sensor. Disconnect electrical connector for crankshaft position sensor. See Fig 1. Electrical connector is located on passenger's side front corner of engine.
  2. Crankshaft position sensor is located near crankshaft pulley, just above oil pan on passenger's side. Using ohmmeter, measure resistance between terminals on electrical connector for crankshaft position sensor.
  3. Replace crankshaft position sensor if resistance is not 835-1400 ohms at 14-122°F (-10-50°C) and 1060-1645 ohms at 122-212°F (50-100°C) on Nippondenso sensors, or 985-1600 ohms at 14-122°F (-10-50°C) and 1265-1890 ohms at 122-212°F (50-100°C) on Aisan sensors. Reinstall electrical connector for crankshaft position sensor. Reinstall air tube.
Fig 1: Identifying & Checking Crankshaft Position Sensor (Turbo)
G95A31369Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
· About lemon-mirror