Camshaft Position Sensor

Disconnect electrical connector from camshaft position sensors. Camshaft position sensors are located on intake manifold side of cylinder head. See Fig 1. Using ohmmeter, check resistance between electrical terminals on each camshaft position sensor.
Replace camshaft position sensor if resistance is not within specification. See CAMSHAFT POSITION SENSOR RESISTANCE table. Reinstall electrical connectors on camshaft position sensors.

CAMSHAFT POSITION SENSOR RESISTANCE

Application

Ohms

Cold ⁽¹⁾

835-1400

Hot ⁽²⁾

1060-1645

⁽¹⁾	Cold is with temperature of 14-122°F (-10-50°C).

⁽²⁾	Hot is with temperature of 122-212°F (50-100°C).

Fig 1: Identifying & Checking Camshaft Position Sensor