lemon-mirror:
Home >> Toyota >> 1998 >> Supra 3.0 D >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Testing >> Ignition Checks >> Crankshaft Position Sensor Resistance >> Non-Turbo

Crankshaft Position Sensor Resistance: Non-Turbo

  1. Crankshaft position sensor is located near crankshaft pulley, just above oil pan on passenger's side of engine with electrical connector located near water pump. Disconnect crankshaft position sensor electrical connector. See Figure. Remove bolt from electrical connector retaining bracket. See Figure.
  2. Using ohmmeter, check resistance between electrical terminals on crankshaft position sensor electrical connector. Ensure crankshaft position sensor resistance is within specification. See CRANKSHAFT POSITION SENSOR RESISTANCE  table. Replace crankshaft position sensor if resistance is not within specification. See REMOVE/INSTALL/OVERHAUL article. Reinstall electrical connector.
· About lemon-mirror