Integration Relay Test: Avalon
- Locate integration relay. See INTEGRATION RELAY LOCATION table. Measure voltage between integration relay 25-pin connector terminal No. 13 and ground. See Fig 1. Turn ignition switch to LOCK position.
- Observe voltmeter and close driver's door. Battery voltage should be present. Open driver's door. Voltage should be zero volts. Observe voltmeter and turn ignition switch to ON position. Battery voltage should be present. If voltage is not as specified, replace integration relay and retest.
INTEGRATION RELAY LOCATION
| Application | Location |
|---|---|
| Avalon, Camry & Camry Solara | Junction Block Behind Instrument Panel, Left Of Steering Column |