lemon-mirror:
Home >> Toyota >> 2001 >> Camry CE, Automatic >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Keyless Entry Systems >> Programming >> Remote Transmitter Registration

Remote Transmitter Registration

NOTE: REWRITE mode erases previous codes on all remote transmitters and recodes them. CONFIRMATION mode is used to determine how many remote transmitters are currently registered.
  1. To start registration of recognition code, ensure ignition key is NOT inserted in ignition lock cylinder, driver's door is open and all other doors are closed. Driver's door must be unlocked. Insert and remove key from ignition lock cylinder. Within 40 seconds, depress door lock control switch on any door 5 times from LOCK to UNLOCK position at about one-second intervals. Close driver's door and then open it, and go to next step.
  2. Within 40 seconds, depress door lock control switch on any door 5 times from LOCK to UNLOCK position at about one-second intervals. Insert key into ignition lock cylinder and turn from ON to LOCK position 2 times at about one-second intervals to select REWRITE mode and 3 times to select CONFIRMATION mode. Remove key from ignition lock cylinder. If REWRITE mode is selected, go to next step. If CONFIRMATION mode is selected, go to step  5.
  3. Integration relay will automatically perform LOCK/UNLOCK operation twice at one-second intervals to indicate, REWRITE mode has been selected. Within 20 seconds, depress both LOCK and UNLOCK buttons simultaneously on remote transmitter for more than one second. Within 3 seconds, depress either LOCK or UNLOCK button on remote transmitter for more than one second.
  4. Within 3 seconds, integration relay will automatically perform LOCK/UNLOCK operation once if registration of recognition code is completed correctly or 2 times if recognition code received first time and second time does not match. If LOCK/UNLOCK operation was performed one time, go to step  6. If LOCK/UNLOCK operation was performed 2 times, return to step  1.
  5. Integration relay automatically performs LOCK/UNLOCK operation 1 to 4 times at 2 second intervals to indicate number of remote transmitter codes registered. If LOCK/UNLOCK operation is performed 5 times, no remote transmitters are registered at this time.
  6. Registration of recognition code procedure will end if 20 seconds has elapsed since last integration relay response, driver's door is closed, key is inserted into ignition lock cylinder, or 4 recognition codes were registered at same time.
· About lemon-mirror