lemon-mirror:
Home >> Toyota >> 2001 >> Prius >> Repair and Diagnosis >> Body & Frame >> Power Windows >> System Tests >> Power Window System Current Test >> Camry Solara

Camry Solara

  1. Disconnect driver's power window master switch harness connector. Connect positive lead of ammeter to terminal No. 3 at driver's power window master switch connector (harness side).
  2. Connect ammeter negative lead to negative terminal of 12-volt battery. Connect jumper wire from positive battery terminal to driver's power window master switch harness connector terminal No. 4. See Figure.
  3. As driver's window is lowered, current should be about 7 amps. When window operation is stopped, current should increase to about 14.5 amps or more. If current is as described, replace driver's power window switch. See POWER WINDOW SWITCH  under REMOVAL & INSTALLATION. If current is not as described, check and repair appropriate circuit as necessary. See WIRING DIAGRAMS .
· About lemon-mirror