Power Point Socket Assembly RR: Replacement

HINT:

COMPONENTS: See COMPONENTS

1. REMOVE PARKING BRAKE HOLE COVER SUB-ASSY (See  INSTRUMENT PANEL/METER  ) 
2. REMOVE FLOOR SHIFT LEVER KNOB SUB-ASSY (M/T TRANSAXLE) (See  INSTRUMENT PANEL/METER  ) 
3. REMOVE CONSOLE PANEL UPPER (See  INSTRUMENT PANEL/METER  ) 
4. REMOVE CONSOLE BOX CARPET 
5. REMOVE CONSOLE BOX SUB-ASSY REAR (M/T TRANSAXLE) (See  INSTRUMENT PANEL/METER  ) 
6. REMOVE CONSOLE BOX SUB-ASSY REAR (A/T TRANSAXLE) (See  INSTRUMENT PANEL/METER  ) 
7. REMOVE POWER POINT SOCKET ASSY RR 
   1. Turn the socket in the circumference direction as shown the illustration, disengage the claw between the socket and the power outlet socket cover RR, and push out the socket to the room side.
      Fig 1: Removing Power Point Socket Assembly RR

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Align the socket with the notch on the power outlet socket cover RR, remove the power point socket assembly RR to the room side.
8. INSTALL POWER POINT SOCKET ASSY RR 
   1. Align the socket with the notch on the power outlet socket cover RR, push the power point socket assembly RR in as hard as possible and install it.