Service Data
SFI - Service Specifications
| Fuel pressure regulator | Fuel pressure | at no vacuum | 265 - 304 kPa (2.7 - 3.1 kgf/cm2 , 38 - 44 psi) |
| Fuel pump | Resistance | at 20°C (68°F) | 0.2 - 3.0 Ω |
| Injector | Resistance | at 20°C (68°F) | 13.4 - 14.2 Ω |
| Injection volume | 56 - 69 cm3 (3.4 - 4.2 cu in.) per 15 seconds | ||
| Difference between each cylinder | 13 cm3 (0.8 cu in.) or less | ||
| Fuel leakage | 1 drop or less per 12 minutes | ||
| MAF meter | Resistance (THA - E2) | at -20°C (-4°F) | 12.5 - 16.9 kΩ |
| at 20°C (68°F) | 2.19 - 2.67 kΩ | ||
| at 60°C (140°F) | 0.50 - 0.68 kΩ | ||
| Throttle body | Throttle body fully closed angle | 5.5° | |
| Throttle control motor | Motor resistance | at 20°C (68°F) | 0.3 - 100 Ω |
| VSV for EVAP | Resistance | at 20°C (68°F) | 30 - 34 Ω |
| VSV for vapor pressure sensor | Resistance | at 20°C (68°F) | 37 - 44 Ω |
| VSV for canister closed valve | Resistance | at 20°C (68°F) | 25 - 30 Ω |
| ECT sensor | Resistance | at -20°C (-4°F) | 10 - 20 kΩ |
| 0°C (32°F) | 4 - 7 kΩ | ||
| 20°C (68°F) | 2 - 3 kΩ | ||
| 40°C (104°F) | 0.9 - 1.3 kΩ | ||
| 60°C (140°F) | 0.4 - 0.7 kΩ | ||
| 80°C (176°F) | 0.2 - 0.4 kΩ | ||
| Vapor pressure sensor | Power source voltage | 4.5 - 5.5 V | |
| Power output voltage | 3.0 - 3.6 V | ||
| Heated oxygen sensor | Heater coil resistance | at 20°C (68°F) | 11 - 16 Ω |
| Accelerator pedal position sensor | Standard throttle valve opening percentage | ||
| Sensor lever full - open position | 60 % or more | ||
| Fuel cut rpm | Fuel return rpm | 1,400 rpm | |
| Fuel pump resister | at 20°C (68°F) | 0.70 - 0.76 kΩ | |