Magnetic Switch Test
- Push in the plunger and check that it returns quickly to its original position. See Fig 1. If Performance is not as specified, replace the magnetic switch.
- Using an ohmmeter, check that there is continuity between terminals 50 and C with a resistance of less than one ohm. See Fig 1. If there is no continuity, replace the magnetic switch.
- Using an ohmmeter, check. that there is continuity between terminal 50 and the switch body of less than 2 ohms. See Fig 1. If there is no continuity; replace the magnetic switch.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002