Service Data
SFI SYSTEM SERVICE SPECIFICATION
| Fuel pressure regulator | Fuel pressure | at no vacuum | 265 - 304 kPa (2.7 - 3.1 kgf/cm2 , 38 - 44 psi) |
| no vacuum | 226 - 265 kPa (2.3 - 2.7 kgf/cm2 , 33 - 38 psi) | ||
| Fuel pump | Resistance | at 20°C (68°F) | 0.2 - 3.0 Ω |
| Injector | Resistance | at 20°C (68°F) | 13.4 - 14.2 Ω |
| Injection volume | 56 - 69 cm3 (3.4 - 4.3 cu in.) per 15 sec. | ||
| Difference between each cylinder | 13 cm3 (0.8 cu in.) or less | ||
| Fuel leakage | 1 drop or less per 12 min. | ||
| MAF meter | Resistance (THA - E2) | at - 20°C (- 4°F) | 13.6 - 18.4 kΩ |
| at 20°C (68°F) | 2.2 - 2.7 kΩ | ||
| at 60°C (140°F) | 0.5 - 0.7 kΩ | ||
| Throttle body | Throttle valve fully closed angle | 6° | |
| Throttle opener setting speed | 900 - 1,950 rpm | ||
| Throttle position sensor | Resistance (VC - E2) | at 20°C (68°F) | 1.3 - 3.2 kΩ |
| Throttle control motor | Motor resistance (M+ - M-) | at 20°C (68°F) | 0.3 - 100 Ω |
| Clutch resistance (CL+ - CL-) | at 20°C (68°F) | 4.2 - 5.2 Ω | |
| Accelerator pedal position sensor | Resistance (VC - E2) | at 20°C (68°F) | 1.2 - 3.2 kΩ |
| VSV for EVAP | Resistance | at 20°C (68°F) | 26 - 30 Ω |
| VSV for CCV | Resistance | at 20°C (68°F) | 25 - 30 Ω |
| at 100°C (212°F) | 32 - 42 Ω | ||
| ECT sensor | Resistance | at - 20°C (-4°F) | 10 - 20 kΩ |
| at 0°C (32°F) | 4 - 7kΩ | ||
| at 20°C (68°F) | 2 - 3 kΩ | ||
| at 40°C (104°F) | 0.9 - 1.3 kΩ | ||
| at 60°C (140°F) | 0.4 - 0.7 kΩ | ||
| at 80°C (176°F) | 0.2 - 0.4 kΩ | ||
| Vapor pressure sensor | Power source voltage (VC - E2) | 4.5 - 5.5 V | |
| A/F sensor | Heater resistance | at 20°C (68°F) | 0.8 - 1.4 Ω |
| at 800°C (1,472°F) | 1.8 - 3.2 Ω | ||
| Heated oxygen sensor | Heater resistance | at 20°C (68°F) | 11 - 16 Ω |
| at 800°C (1,472°F) | 23 - 32 Ω | ||
| Fuel cut rpm | Fuel return rpm | M/T | 1,000 rpm |
| A/T | 1,200 rpm | ||