lemon-mirror:
Home >> Toyota >> 2006 >> Sequoia Limited, 4WD >> Repair and Diagnosis >> Engine Performance >> Engine Control System >> Crankshaft Position Sensor >> Removal

Crankshaft Position Sensor: Removal

  1. REMOVE ENGINE UNDER COVER NO.1 
  2. REMOVE CRANKSHAFT POSITION SENSOR 
    1. Disconnect the crankshaft position sensor connector.
    2. Remove the bolt and crankshaft position sensor.
      Fig 1: Removing Bolt And Crankshaft Position Sensor
      G04507027Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
· About lemon-mirror