lemon-mirror:
Home >> Toyota >> 2006 >> Sequoia Limited, RWD >> Repair and Diagnosis >> Engine Performance >> Engine Control System >> Camshaft Timing Oil Control Valve Assembly >> Removal

Camshaft Timing Oil Control Valve Assembly: Removal

  1. REMOVE THROTTLE BODY COVER 
  2. REMOVE INTAKE AIR CONNECTOR 
  3. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY 
    1. Disconnect the 2 camshaft oil control valve connectors.
    2. Remove the bolt, camshaft oil control valve and O-ring.

      Torque: 7.5 N*m (76 kgf*cm, 66 in.*lbf) 

    3. Remove the O-ring from the each camshaft oil control valve.

      HINT:

      At the time of installation, please refer to the following items. Use a new O-rings.

      Fig 1: Removing Bolt, Camshaft Oil Control Valve
      G04507021Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
· About lemon-mirror