Charging System: Generator: Removal

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
REMOVE V-BANK COVER SUB-ASSEMBLY (See REMOVAL )
REMOVE FAN AND GENERATOR V BELT (See REMOVAL )
REMOVE GENERATOR ASSEMBLY
1. Disconnect the wire harness clamp.
  
  Fig 1: Locating Wire Harness Clamp
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the terminal cap.
3. Remove the nut and disconnect the wire harness from terminal B.
4. Disconnect the generator connector from the generator assembly.
  
  Fig 2: Locating Generator Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. Remove the nut from the cylinder block.
  
  Fig 3: Locating Cylinder Block Nut
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
6. Remove the 2 bolts and generator assembly.
  
  Fig 4: Locating Generator Assembly Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
7. Remove the bolt and wire harness clamp stay.
  
  Fig 5: Locating Wire Harness Clamp Stay Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
8. Remove the bolt and bracket.
Fig 6: Locating Bracket Bolt
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002