lemon-mirror:
Home >> Toyota >> 2007 >> Camry Solara SLE, 2D Convertible >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (3MZ-FE) >> ECM >> Removal

Engine Control System (3MZ-FE): ECM: Removal

  1. DISCONNECT BATTERY NEGATIVE TERMINAL 
  2. REMOVE FRONT DOOR SCUFF PLATE RH (for Coupe) (See  REMOVAL  ) 
  3. REMOVE FRONT DOOR SCUFF PLATE RH (See  REMOVAL  ) 
  4. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH (See  REMOVAL  ) 
  5. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH (See  REMOVAL  ) 
  6. REMOVE NO.1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (See  REMOVAL  ) 
  7. REMOVE INSTRUMENT PANEL FINISH LOWER PANEL RH (See  REMOVAL  ) 
  8. REMOVE ECM 
    1. Remove the 2 wire harness clamps.
    2. Disconnect the 5 ECM connectors.
    3. Remove the 2 nuts and ECM.
      Fig 1: Locating ECM Connectors
      G05128342Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  9. REMOVE ECM BRACKET 
    1. Remove the 2 screws and ECM bracket.
      Fig 2: Locating ECM Bracket Screws
      G05128343Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  10. REMOVE ECM BRACKET NO.2 
    1. Remove the 2 screws and ECM bracket.
      Fig 3: Locating ECM Bracket No.2 Screws
      G05128344Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
· About lemon-mirror