Starting System: Starter: Installation

1. Install the starter assembly with 2 bolts.

   Torque: 37 N*m (377 kgf*cm, 27 ft.*lbf) 

   Fig 1: Identifying Starter Assembly Bolts

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the wire harness to the terminal 30, then install the nut.

   Torque: 5.9 N*m (60 kgf*cm, 52 in.*lbf) 

   Fig 2: Connecting Wire Harness To Terminal 30

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Connect the terminal 50 connector to the starter assembly.

1. Install the wire harness onto the cylinder block with the bolt.

   Torque: 13 N*m (133 kgf*cm, 10 ft.*lbf) 

   Fig 3: Identifying Wire Harness

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Install the No. 2 manifold stay with the 3 bolts.

   Torque: 40 N*m (408 kgf*cm, 30 in.*lbf) 

   Fig 4: Identifying No. 2 Exhaust Manifold Stay Bolts

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Install the No. 2 engine under cover with the 4 bolts.

   Torque: 29 N*m (296 kgf*cm, 21 ft.*lbf) 

Torque: 3.9 N*m (40 kgf*cm, 35 in.*lbf)