lemon-mirror:
Home >> Toyota >> 2007 >> FJ Cruiser RWD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Charging System >> Generator >> Removal

Charging System: Generator: Removal

  1. REMOVE BATTERY 
  2. REMOVE V-BANK COVER  (See REMOVAL )
  3. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY  (See REMOVAL )
  4. REMOVE FAN AND GENERATOR V BELT  (See REMOVAL )
  5. REMOVE GENERATOR ASSEMBLY 
    1. Disconnect the wire harness.
      1. Remove the bolt and wire harness stay.
        Fig 1: Identifying Wire Harness Stay
        G05110501Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      2. Disconnect the connector from the generator assembly.
      3. Remove the terminal cap and nut.
        Fig 2: Identifying Terminal Cap & Nut
        G05110502Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      4. Disconnect the wire harness from terminal B.
    2. Remove the 2 bolts, then separate the wire harness clamp bracket from the generator assembly.
      Fig 3: Identifying Wire Harness Clamp Bracket
      G05110503Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Remove the 2 bolts, then remove the generator assembly.
      Fig 4: Identifying Generator Assembly Bolts
      G05110504Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
· About lemon-mirror