Rear Lateral Control Rod: Removal

SUPPORT REAR AXLE HOUSING WITH JACK
REMOVE REAR LATERAL CONTROL ROD ASSEMBLY
1. Remove the nut, washer, bolt and lateral control rod.
  Torque: 149 N*m (1,520 kgf*cm, 110 ft.*lbf) for bolt
  
  150 N*m (1,530 kgf*cm, 111 ft.*lbf) for nut
  
  HINT:
  
  At the time of installation, please refer to the following items.
  - Replace the 2 used nuts with new ones.
  - After stabilizing the suspension, torque the nuts.
    
    Fig 1: Removing Nut, Washer, Bolt & Lateral Control Rod
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002