lemon-mirror:
Home >> Toyota >> 2007 >> Matrix Base, Automatic >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Engine Immobilizer >> Engine Immobiliser System >> DTC Check/Clear

DTC Check/Clear

  1. CHECK DTC 
    1. Connect the intelligent tester to the Controller Area Network Vehicle Interface Module (CAN VIM). Then connect the CAN VIM to the DLC3.
    2. Turn the ignition switch ON.
    3. Read the DTCs by following the directions on the tester screen.

      HINT:

      Refer to the intelligent tester operator's manual for further details.

      Fig 1: Connecting Intelligent Tester (With CAN VIM) To DLC3
      G05236776Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. CLEAR DTC 
    1. Connect the intelligent tester (with CAN VIM) to the DLC3.
    2. Turn the ignition switch ON.
    3. Erase the DTCs by following the directions on the tester screen.

      HINT:

      Refer to the intelligent tester operator's manual for further details.

· About lemon-mirror