lemon-mirror:
Home >> Toyota >> 2007 >> Matrix Base, Automatic >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Suspension System >> Rear Shock Absorber >> Disposal

Rear Shock Absorber: Disposal

  1. DISPOSE OF SHOCK ABSORBER ASSEMBLY REAR LH 
    1. Fully extend the shock absorber rod.
    2. Using a drill, make a hole in the cylinder as shown in the illustration to discharge the gas inside the cylinder.
      CAUTION:
      • When drilling, since the fragments may fly out, work carefully.
      • The discharged gas is colorless, odorless and non-poisonous.
        Fig 1: Identifying Drill Area
        G05194691Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
· About lemon-mirror