Throttle Body: Installation

INSTALL THROTTLE BODY
1. Install the throttle body with the nut and 3 bolts.
  Torque: 14 N*m (143 kgf*cm, 10 ft.*lbf)
  
  Fig 1: Locating Throttle Body With Nut And Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the 2 water bypass hoses to the throttle body.
3. Connect the throttle control connector.
INSTALL INTAKE AIR CONNECTOR
FILL WITH ENGINE COOLANT
(See REPLACEMENT )
START ENGINE AND CHECK FOR ENGINE COOLANT LEAKS
INSTALL THROTTLE BODY COVER

Fig 2: Locating Water Bypass Hoses
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002