lemon-mirror:
Home >> Toyota >> 2007 >> Sequoia Limited, RWD >> Repair and Diagnosis >> Engine Performance >> Tune-Up >> Engine Ignition System >> VVT Sensor >> Installation

VVT Sensor: Installation

  1. INSTALL VVT SENSOR 
    1. Attach the VVT sensor to the cylinder head.
    2. Install the VVT sensor with the bolt.

      Torque: 6.5 N.m (65 kgf.cm, 58 in.lbf) 

  2. INSTALL INTAKE MANIFOLD  (See appropriate INSTALLATION procedures)
  3. INSTALL THROTTLE BODY COVER SUBASSEMBLY 
· About lemon-mirror