lemon-mirror:
Home >> Toyota >> 2007 >> Sienna CE >> Repair and Diagnosis >> Electrical >> Starter >> Starting System >> Ignition Switch >> Installation

Ignition Switch: Installation

  1. INSTALL IGNITION SWITCH ASSEMBLY 
    1. Install the ignition switch with the 2 screws.
    2. Install the ignition switch connector.
      Fig 1: Locating Ignition Switch Screws And Connector
      G05140069Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL STEERING COLUMN COVER LOWER 
    1. Attach the 4 claws to install the steering column cover lower.
    2. Insert the key into the ignition key cylinder and release the steering lock.
    3. Turn the steering wheel counterclockwise and install the screw.
      Fig 2: Identifying Steering Column Cover Lower Screws (1 Of 2)
      G05140068Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Turn the steering wheel clockwise and install the screw.
      Fig 3: Identifying Steering Column Cover Lower Screws (2 Of 2)
      G05140067Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
· About lemon-mirror